The main element of the system was reliable inverter rectifier Origo ™ Tig 4300 IW AC / DC with water cooling. The source has been specifically designed to perform efficient and high-quality TIG welding of different materials.

Functions Origo Tig 4300iw AC / DC:

– function QWave ™ – provides high-quality AC welding with high arc stability and at a fairly low level of noise,
– Pulse TIG DC welding provides easy control the amount of heat input,
– Function ESAB LogicPump ( ELP ) is an automatic on the cooling unit in the application of a liquid-cooled torch,
– A special energy-saving mode – in case of need is the fan and pump
– Function ESAB 2 – program allows you to pre-program and change program during welding
– Functions ” Hot start “(hot start), polarity switch and” A RC Force “(arc force)
– Ease of operation,
– Control Panel TA 24 AC / DC shows all the parameters in easy to read form.

The control panel TA24 AC / DC – TIG, MMA:

Welding current;
Pulse duration;
Base current;
Duration of the base current;
Gas time after switching off the arc;
AC balance. current;
The frequency of AC. current;
Preheating electrode.

Scope of supply:
5 m connection cable
2 m gas hose with two clamps
return cable 4,5 m

Items included: Watercool Box, Watercool Tig torch, cables, accessories, headshield, glove , regulator and others

• Weight 95
• Class of protection IP 23
• Mains voltage, V 400/3
• Fuse, A 35
• PV 40%, TIG, A 430/27.2
• DC 60%, TIG, A 400/26
• PX 100%, TIG, A 315/22.6
• The open circuit voltage MMA, in 83
• Power factor at maximum current 0.79
• Efficiency at maximum current,% 93
• The range of current control TIG DC, A 4-430
• The range of current regulation (MMA) 16-430
• Frequency Mode AC Hz 10-150
• Balance mode AC,% 50-98
• The current rise time, with 0-10
• Down-slope time, with 0-10
• The gas supply after the blowout, with 0-25

• 1 year with back up services, technical support and all spare parts are available